Q & A #35 With The Auto Specialist

Author: Car Parts Guy  |  Category: Autos and Cars, Car Q and A

Q & A #35 With The Auto Specialist

Welcome back to the Auto Specialist. I spent some time recently going through past car-related questions that we’ve addressed in this column. I was surprised to see the breadth of material that we’ve covered. There are questions regarding tires, alternators, engines, radiators, transmissions, and much more. If you’re joining us for the first time and would like to expand your automotive knowledge, take a peek through the past segments.

Last time, we helped a reader named Frank diagnose his vehicle’s sluggish acceleration. We also suggested that another reader, Jennifer, think twice about having her car’s transmission flushed. Today, we’re going to help Delores with her van’s exhaust problem and Stanley’s engine cranking issue. Let’s dive in.

Question: I own a 2000 Oldsmobile Silhouette with 133,240 miles. About a month ago, I noticed blue smoke coming from my tailpipe (actually, my granddaughter pointed it out). I was hoping it would go away, but it seems to have gotten worse. I’m going to visit the dealership next week to have them take a look, but I wanted to ask you first. What makes the smoke coming from the tailpipe blue?

Answer: Thanks for your letter, Delores. If you’re seeing blue smoke, that means your van’s engine is burning oil. The oil is somehow getting past the piston rings and going into the cylinders. During the cylinder’s internal combustion process, the oil is getting burned along with the fuel. That is what is causing the blue smoke. The bad news is that you’ll probably need to have the engine overhauled. Prepare yourself for a hefty repair bill.

Question: I’m driving a Ford Expedition (1998) and it has just under 127,000 miles on it. I’m having a problem turning the engine over consistently. A few weeks ago, it was only happening once in awhile. It was annoying, but I could live with it. Now, it happens more often (but not every time I try to start the thing). Anyway, it’s getting to be a bigger problem and I wanted to ask you about it before seeing the mechanic. What would you say is causing the problem?

Answer: Thanks for writing in, Stanley. It’s hard to say for sure, but I’d start with the battery. The fact that it only happens occasionally (though it’s becoming more prevalent) suggests that it’s not the alternator. Pop the hood and clean the poles and connections on your battery. Then, test it for a charge. If the battery is fine, test your starter solenoid for the right voltage. Then, move to the ignition switch and starter.

These type of problems are often difficult to nail down. But, I would approach it in the order I mentioned.

That’s it for today’s installment. My thanks to Delores and Stanley for writing in with their car problems. Next time, we’ll help Jonathan figure out why his vehicle isn’t starting. We’ll also answer Elaine’s question about how often her car’s air filter needs to be changed. Be sure to join me for those questions next time. Until then, drive safely.

Related posts

Q & A #33 With The Auto Specialist

Author: Car Parts Guy  |  Category: Autos and Cars, Car Q and A

Q & A #33 With The Auto Specialist

Welcome back to the latest edition of the Auto Specialist. Lately, we’ve been covering a lot of great car questions involving nearly every part under the hood. From engines to transmissions to brakes and alternators, we’ve created an impressive library of automotive knowledge. I’d like to encourage you to write in with any car-related problems you’re experiencing so we can help diagnose them for you.

Last time, we helped a reader named Jonathan figure out what was causing the rotten egg smell in his car. We also helped Tony with his decision to buy a vehicle where the owner didn’t have the maintenance records. Today, we’ll help Tom with his Malibu’s head gasket and Doreen with her Cutlass’s fuel injectors. Let’s get started.

Question: I drive a 2000 Chevrolet Malibu with 112,700 miles. For the past six years, I’ve had to have the guys at my local garage take the head gasket out and put a new one in. I only drive about 14,000 miles every year and I know my car shouldn’t need a replacement this often (I read that online). It’s not a big deal because it’s just an annual thing, but it bugs me and it’s kind of expensive. Do you know why the head gasket in my car goes bad so quickly?

Answer: Thanks for writing, Tom. As you mentioned, replacing the gasket every year should be unnecessary. They typically last much longer. That being said, there are a lot of reasons why a gasket can fail. One of those reasons involves the surface of the engine block. Here’s what happens: the gasket’s job is to seal the area between your block and the cylinder head. A lot of times, the block’s surface is rough. That means the gasket can’t seal the area well. Coolant and compression leaks happen. Ask the mechanics at the garage to take a look at the surface of your engine block. I’m wagering that’s the problem.

Question: My car is a 1998 Oldsmobile Cutlass and the odometer says 157,247. When I press on the brake pedal, I can feel a pulsing sensation. I just had the brakes done recently, so they should be good, right? When I told the men who originally did the brake job about the problem, they couldn’t figure out the cause. Yesterday, I took my car to another repair shop in my area and asked them to take a look. They said my rotors have been trimmed too far and I need replacements. Honestly, I’m a little intimidated by mechanics. Can you tell me what they meant by the trimming?

Answer: Thanks for your email, Doreen. Here’s what the mechanics mean by trimming: when brake pads are replaced, the mechanic will sometimes “machine” the rotor if the pads are severely worn. Rotors can only be machined or “trimmed” so far. In fact, manufacturers will stamp the minimum right onto the part. If the rotor is trimmed below that minimum, the heat generated by your braking system will cause them to warp.

Your rotors are likely warped, which is why you’re feeling the pulsing sensation when you press down on your brake pedal. To the credit of the second group of mechanics, they’re right. You’ll need to have them replaced.

That’s a wrap for this installment. My thanks to both Tom and Doreen for allowing us to help them with their car problems. Next time, we’ll help Frank with his van’s fuel injectors and Jennifer with her car’s transmission. Be sure to come back for that. Until then, drive safely.

Related posts